Epson Remanufactured 200 Series Installation Tips
Epson Generic 200 Series Ink Cartridge Installation Instructions
Step 1: After installing remanufactured generic ink cartridges into your Epson 200 series printer its likely you will receive a message on the printer screen as per Figure1. Press on the Proceed button
Figure 1: Epson 200 series ink cartridge recognition display screen
Step 2: Click on Continue
Figure 2: Press on the Continue button and return to printing.
Error screen 1a: If this screen appears after changing the cartridges remove the cartridges from the printer and refit. Then remove the power cord from the rear of the printer, wait 5 minutes and then re attach power cord and then turn on printer and try again.
Figure 3: Ink recognition error screen 1a
Error screen 1b: If this screen appears after changing the cartridges remove the cartridges from the printer and refit. Then remove the power cord from the rear of the printer, wait 5 minutes and then re attach power cord and then turn on printer and try again.
Figure 4: Ink recognition error screen 1b
If the above procedures do not remedy the error screens, please contact technical support for further instructions.